Ignite 3", 4" & 4" to 3" Dual Turbo-Back Off-Road Sports Exhaust Systems - Toyota Landcruiser 79 Series Dual Cab 4.5L V8 (1VD-FTV)

Designed, engineered and manufactured at the Ignite facility in Sunbury, Victoria. Off-road / racing turbo-back systems for the Toyota 1VD-FTV 4.5L V8 turbo diesel in the Landcruiser 79 Series Dual Cab - full DPF-delete design. Available in 3", 4" single, or 4" to 3" dual layouts; side exit option on 4" only.

How It's Made

  • Pipework: CNC mandrel-bent 3" (76mm) and 4" (101.6mm) tubing
  • Flanges: Thick laser-cut plates for sealing surface flatness and long-term durability
  • Installation kit: Included with the system
  • Origin: Made in Australia

Specifications

  • System type: Turbo-back, off-road (DPF-delete)
  • Pipe diameters available: 3", 4", or 4" to 3" dual
  • Pipe construction: CNC mandrel-bent
  • Flange plates: Thick laser-cut
  • Installation kit: Included
  • Country of manufacture: Australia (Sunbury, VIC)

Material Options

  • Aluminised steel
  • 409 grade stainless steel - higher corrosion resistance for longer service life in Australian conditions

Choose Your Configuration

Cat-equipped:

  • Cat & Muffler
  • Cat & Hotdog
  • Cat & Pipe Only
  • Cat & Pipe Only Side Exit (4" only)

No cat:

  • No Cat & Muffler
  • No Cat & Hotdog
  • No Cat & Pipe Only
  • No Cat & Pipe Only Side Exit (4" only)

For the DPF-retaining variant, see the DPF Back options.

Fitment

  • Vehicle: Toyota Landcruiser 79 Series Dual Cab
  • Engine: 4.5L V8 turbo diesel, Toyota 1VD-FTV
  • DPF status: DPF-delete - this turbo-back system removes the factory DPF

These options are sold for off-road and racing use only. Please consider before making your purchase. Note: an ECU recalibration is required when deleting your DPF.

SKU tland79ddpfdel
Brand IGNITE Exhausts
Shipping Weight 24.0000kg
Shipping Width 0.330m
Shipping Height 0.340m
Shipping Length 1.350m
Shipping Cubic 0.151470000m3

Be The First To Review This Product!

Help other Ignite Exhausts users shop smarter by writing reviews for products you have purchased.

Write a product review

  1. Remove rear tail pipe and muffler assembly from the vehicle.  
  2. Remove centre connecting and DPF pipe from the vehicle whilst also removing the O2 sensor.
  3. Using the factory DPF spring loaded bolts fit the DPF pipe and tighten finger tight. Also fit the rectangular mounting plates on top of the exhaust hanger mounts with the x2 10mm nuts finger tight on top.
  4. Screw in the O2 sensor and tighten.
  5. Fit the connecting pipe to the DPF pipe and tighten finger tight with the supplied 3/8 UNC nuts. Also fit the rectangular mounting plates on top of the exhaust hanger mounts with the x2 10mm nuts finger tight on top.
  6. Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts.
  7. Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts. Also fit the rectangular mounting plates on top of the exhaust hanger mounts with the x2 10mm nuts finger tight on top.
  8. Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call 1300 12 13 12 as soon as possible to avoid damaging the exhaust system.
  9. Enjoy your IGNITE exhaust!