Ignite 3" DPF-Back Sports Exhaust System - Holden RG Colorado MY17 2.8L (2016-2020)

Designed, engineered and manufactured at the Ignite facility in Sunbury, Victoria. This 3" DPF-back system is engineered for the Holden RG Colorado MY17 2.8L turbo diesel - picks up from the factory DPF.

How It's Made

  • Pipework: CNC mandrel-bent 3" (76mm) tubing for consistent internal diameter through every bend
  • Flanges: Thick laser-cut plates for sealing surface flatness and long-term durability
  • Origin: Made in Australia

Specifications

  • System type: DPF-back (retains factory DPF)
  • Pipe diameter: 3" (76mm)
  • Pipe construction: CNC mandrel-bent
  • Flange plates: Thick laser-cut
  • Country of manufacture: Australia (Sunbury, VIC)

Material Options

  • Aluminised steel
  • 409 grade stainless steel - higher corrosion resistance for longer service life in Australian conditions.

Choose Your Configuration

  • Hotdog
  • Muffler
  • Pipe
  • Diff Pipe

Fitment

  • Vehicle: Holden RG Colorado MY17
  • Engine: 2.8L turbo diesel
  • Years: 2016-2020
  • DPF status: DPF-equipped - this system is DPF-back and retains the factory DPF
SKU rgcol28dpf
Brand IGNITE Exhausts
Shipping Weight 20.0000kg
Shipping Width 0.250m
Shipping Height 0.390m
Shipping Length 1.300m
Shipping Cubic 0.126750000m3

Be The First To Review This Product!

Help other Ignite Exhausts users shop smarter by writing reviews for products you have purchased.

Write a product review

  1. Remove rear tail pipe and muffler assembly from the vehicle. 
  2. Remove centre connecting and DPF pipe from the vehicle.
  3. Using the factory DPF flange nuts fit the DPF pipe and tighten finger tight.
  4. Fit the connecting pipe to the DPF pipe and tighten finger tight with the supplied 3/8 UNC nuts.
  5. Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts. (Fit diff pipe section in the same format if that’s what you purchased and then continue with step 7)
  6. Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts.
  7. Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call 1300 142 000 as soon as possible to avoid damaging the exhaust system.
  8. Enjoy your IGNITE exhaust!