Ignite 3" & 3.5" Turbo-Back Off-Road Exhaust System - 2026 Toyota Hilux N90 2.8L

Designed, engineered and manufactured at the Ignite facility in Sunbury, Victoria. The off-road / racing turbo-back system for the 2026 Toyota Hilux N90 2.8L turbo diesel - a full DPF-delete design optimised for maximum flow.

How It's Made

  • Pipework: CNC mandrel-bent 3" (76mm) and 3.5" (89mm) tubing
  • Flanges: Thick laser-cut plates for sealing surface flatness and long-term durability
  • Installation kit: Included with the system
  • Origin: Made in Australia

Specifications

  • System type: Turbo-back, off-road (DPF-delete)
  • Pipe configuration: 3" (76mm) and 3.5" (89mm)
  • Pipe construction: CNC mandrel-bent
  • Flange plates: Thick laser-cut
  • Installation kit: Included
  • Country of manufacture: Australia (Sunbury, VIC)

Material Options

  • Aluminised steel
  • 409 grade stainless steel - higher corrosion resistance for longer service life in Australian conditions

Choose Your Configuration

Cat-equipped:

  • Cat & Muffler
  • Cat & Hotdog (High Flow Sports Resonator)
  • Cat & Pipe Only
  • Cat & Diff Pipe Only

No cat:

  • No Cat & Muffler
  • No Cat & Hotdog (High Flow Sports Resonator)
  • No Cat & Pipe Only
  • No Cat & Diff Pipe Only

For the DPF-retaining variant, see the DPF Back systems.

Fitment

  • Vehicle: Toyota Hilux N90
  • Engine: 2.8L turbo diesel
  • Years: 2026 model onwards
  • DPF status: DPF-delete - this turbo-back system removes the factory DPF

These options are sold for off-road and racing use only. Please consider before making your purchase. Note: an ECU recalibration is required when deleting your DPF.

SKU thilux28-26dpfdel
Brand IGNITE Exhausts
Shipping Weight 10.0000kg
Shipping Width 0.390m
Shipping Height 0.250m
Shipping Length 1.300m
Shipping Cubic 0.126750000m3

Be The First To Review This Product!

Help other Ignite Exhausts users shop smarter by writing reviews for products you have purchased.

Write a product review

  1. Remove rear tail pipe and muffler assembly from the vehicle.  
  2. Remove centre connecting and DPF pipe from the vehicle.
  3. Using the factory DPF spring loaded bolts fit the DPF pipe and tighten finger tight.
  4. Fit the connecting pipe to the DPF pipe and tighten finger tight with the supplied 3/8 UNC nuts. (Fit diff pipe section in the same format if that’s what you purchased and then continue with step 7)
  5. Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts.
  6. Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts.
  7. Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call 1300 12 13 12 as soon as possible to avoid damaging the exhaust system.
  8. Enjoy your IGNITE exhaust!