Ignite 3" Turbo-Back Off-Road Exhaust System - Mitsubishi MQ Triton 2.4L

Designed, engineered and manufactured at the Ignite facility in Sunbury, Victoria. This is the off-road / racing turbo-back system for the Mitsubishi 4N15 MIVEC 2.4L inline 4-cylinder diesel in the MQ Triton - a full DPF-delete design optimised for maximum flow and minimum back pressure from the turbo rearward.

How It's Made

  • Pipework: CNC mandrel-bent 3" (76mm) tubing for consistent internal diameter through every bend
  • Flanges: 10mm thick laser-cut plates for sealing surface flatness and long-term durability
  • Installation kit: Included with the system
  • Origin: Made in Australia

Specifications

  • System type: Turbo-back, off-road (DPF-delete)
  • Pipe diameter: 3" (76mm)
  • Pipe construction: CNC mandrel-bent
  • Flange plates: 10mm laser-cut
  • Installation kit: Included
  • Country of manufacture: Australia (Sunbury, VIC)

Material Options

  • Aluminised steel - cost-effective option
  • 409 grade stainless steel - higher corrosion resistance for longer service life in Australian conditions

Choose Your Configuration

Cat-equipped:

  • Cat & Muffler
  • Cat & Resonator
  • Cat & Pipe Only

No cat:

  • No Cat & Muffler
  • No Cat & Hotdog
  • No Cat & Pipe Only

For the DPF-retaining variant, see the DPF-Back Exhaust.

Fitment

  • Vehicle: Mitsubishi MQ Triton
  • Engine: 2.4L turbo diesel, Mitsubishi 4N15 MIVEC inline 4-cylinder
  • DPF status: DPF-delete - this turbo-back system removes the factory DPF

These options are sold for off-road and racing use only. Please consider before making your purchase. Note: an ECU recalibration is required when deleting your DPF.

SKU mtmq24dpfdel
Brand IGNITE Exhausts
Shipping Weight 24.0000kg
Shipping Width 0.390m
Shipping Height 0.250m
Shipping Length 1.300m
Shipping Cubic 0.126750000m3

Be The First To Review This Product!

Help other Ignite Exhausts users shop smarter by writing reviews for products you have purchased.

Write a product review

  1. Remove rear tail pipe and muffler assembly from the vehicle.                                                     
  2. Remove centre connecting and DPF pipe from the vehicle.
  3. Fit the DPF pipe to the DPF flange using the factory spring loaded bolts.
  4. Fit the connecting pipe section to the DPF pipe and tighten finger tight with the supplied 3/8 UNC nuts.
  5.  Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts.
  6.  Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts.
  7.  Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call 1300 12 13 12 as soon as possible to avoid damaging the exhaust system.
  8.  Enjoy your IGNITE exhaust!